Singlecut Bass
The Singlecut is ergonomically designed with a semi-curve top and heavy rear carving to make a very comfortable bass with no restrictions on playability. The upper bout continues to around the 12th fret and is carved at the rear to maintain a slim neck profile. The added stability this adds to the neck means the lower bout can be carved in deeper to allow access to up to 26 frets and couple to the laminated and carbon fibre reinforced neck achieves a noticeable increase in sustain and harmonic content.
ARTICULATE AND FLUID
“Ergonomic Design”
The headstock is a scarf joint (as on the Uberhorn) and made from the same wood as the body, faced front and rear with veneers to match the figured semi-curve top.
A large choice of fretboards from the usual maples and rosewoods to the more exotic, macassar ebony, palm wood, cocobolo to name a few.
A choice of hardware and Pickups from the most respected and highest quality manufacturers, such as Schaller, Gotoh, Hipshot and EMG, Seymour Duncan, Aguilar. Options on custom wound pickups from Aaron Armstrong and Mojo. Active preamps from John East, Aguilar, Seymour Duncan available in 2 and 3 band. The sum of these parts is a unique and expressive bass, a wealth of tones.
Available in all string formats and several scale lengths, nut widths and necks carved to customers requirements. Hardwearing stainless steel fret wire and brass nuts.
Necks are finished in either gloss or satin lacquer for super smooth feel, bodies in polyester base coat and polyurethane topcoats, satin or gloss.
Recently Built
5 String Singlecut
Flamed Sycamore top on swamp ash body, laminated maple and wenge neck. Delano humbuckers and John East electronics. ABM hardware.
Build Diary
A set-neck Singlecut, laminated maple and wenge neck, black walnut body with a buckeye burr facing
Specification Options
Set / Through or Bolt-on Neck, Thru board incorporating bridge, ramp and pop scoop.
33″, 34″ or 35″ scale and multiscale
Options on nut width and string spacings
24 or 26 frets and fretless option
Small, medium & jumbo stainless steel fretwire
5, 7 or 9 piece laminated neck – maple / black veneers / wenge / walnut and many others
Ebony, Macassar, Maple or Rosewood fingerboards
Position dots / inlay options and Luminlay
Matching headstock facings front and rear
Scarf jointed headstock, angled back
Brass, Bone or Graphite nut
Two way truss rod, carbon fibre reinforcement
Satin neck lacquer, gloss headstock face, finish as body
Schaller M4 light or Gotoh GB707 tuners
Wide choice of figured facing woods
Swamp ash, white ash, mahogany, black walnut and other body woods
Polyester basecoat, satin or gloss polyurethane topcoats.
Clear, tints, bursts and solid colour
Through board with integrated saddles / ABM or Gotoh bridge
Wide choice of pickups – custom wound, Delano, EMG, Seymour Duncan, Dimarzio, Aguilar
2 or 3 band eq – Shuker, EMG, Delano, Seymour Duncan, East UK. Ghost acoustiphonic piezo / midi option
Chrome, black or gold hardware
